- CE-marking in accordance with EN 1504-6
- jointing mortar approved by DIBt
- pumpable
- very easy to mold, for mechanical jointing of prefabricated parts
- cement-bound
VS-P joint mortar
swelling jointing mortar of gel-like consistence in accordance to the DAfStb VeBMR directive
- granularity: 0-2 mm
- grouting height: 10-40 mm
- consumption: 2.000 kg/m³
- processing time at 20°C (68 °F): about 60 min
- expansion after 24 h: ≥0,3 %
- compressive strength after 28 d: ≥ 80 N/mm²
properties
- swelling mortar with thixotropic consistence, easy to mold and form for mechanical filling of joints between prefabricated parts
- easy to mix with double-shaft mixer, hand mixer, forced action mixer and suitable continous flow mixer for modern mixing procedures
- pumpable with customary spiral pumps with feed volume adjusted to joint width
- develops high initial und final strength
- best bond in joints subject to shear stress due to controlled swelling
- impermeable to water
- satisfies the requirements of the type A1 construction materials (non-flammable) according to the ruling 2000/605/EG of the European Commission, September 26th 2000 (published in official journal, L258)
classification according to VeBMR
- shrinkage class: SKVM II
- early strength class: A
- compressive strength class: C55/67
fields of application
- jointing mortar, approved by the competent authority for the PFEIFER–VS®-ISI/BZ Systems 3D
- filling of vertical and horizontal joints of prefabricated reinforced concrete structures
- filling of constructional joints, slots and cavities
