- CE-marking in accordance with EN 1504-6
- steel fibre or stainless steel fibre grouting mortar
- high flexural and shear resistance
- cement-bound
V1/50SF steel fibre grout
highly flowable swelling grouting concrete, reinforced with steel fibre with high initial and final firmness
- granularity: 0-5 mm
- grouting height: 30-120 mm
- consumption: 2.100 kg/m³
- processing time at 20°C (68 °F): about 60 min
- expansion after 24 h: ≥ 0,1 %
- compressive strength after 28 d: ≥ 75 N/mm²
Produkteigenschaften
- high fluidity
- controlled swelling and strong locking connection between machine plate and concrete foundations
- high initial and final strength
- low water/cement ratio
- high flexural and shear strength and high impact resistance
- high impact, abrasion and grinding resistance
- impermeable to water and to great extent resistant against mineral oils and fuel
- steel fibre reinforcement and even more so stainless steel fibre reinforcement improve the thermal conductivity. Stressed caused by heat are fundamentally lower and are quickly dissipated
- self-monitoring according to the DAfStb VeBMR directive
- satisfies the requirements of the type A1 construction materials (non-flammable) according to the ruling 2000/605/EG of the European Commission, September 26th 2000 (published in official journal, L258)
Anwendungsgebiete
- rail bearings and heavy foundations
- construction elements subject to particularly high stresses
- under particularly heavy burdens, usable with low grouting heights
- grouting of large dimension foundations
- acts as reinforcement in occasions, in which due to constructive reasons reinforcement cannot be built in
