- CE-marking in accordance with EN 1504-6
- controlled swelling for adherent bonding between concrete and supporting construction
- develops high bond strength
- cement-bound
- plastic consistence
E1-P anchor mortar
soft plastic swelling mortar with high initial and final firmness
- granularity: 0-0,5 mm
- processing time at 20°C (68 °F): about 45 min
- consumption: 1.800 kg/m³
- expansion after 24 h: ≥ 0,1 %
- compressive strength after 28 d: ≥ 50 N/mm²
Produkteigenschaften
- soft, plastic consistence
- controlled swelling with strong adherent bonding
- high initial and final strength and high bond strength
- low water/cement ratio
- to great extent resistant to mineral oils and fuel
- satisfies the requirements of the type A1 construction materials (non-flammable) according to the ruling 2000/605/EG of the European Commission, September 26th 2000 (published in official journal, L258)
Anwendungsgebiete
- water treatment plants
- for overhead works and filling of joints, cavities and rock bolts
- on vertical surfaces as well as for centrifugation in pipes and shafts
