Pagel - Spezial Beton

PAGEL / Products / PAGEL quick-setting products

When it's time to speed up!

The new PAGEL quick-setting product series.

You know it well: Time pressure in the project? You must finish? Exactly for such situations we have further developed the PAGEL V2 quick-setting grouts and other quick-setting products for you and improved the material properties even more. And all this without compromise and with the well-known high PAGEL quality! Interested? Then take a look at the product comparison!

PAGEL quick-setting product serie compared

Improved properties of the new V2 series

PAGEL® V2 quick-setting grout

  • three products for wider application range
  • higher early strength (2 h ≥ 15 MPa)
  • grouting heights up to 640 mm
  • improved flowability
  • higher compressive strength (up to compressive strength class C70/85)
  • significantly lower shrinkage behaviour
  • lower heat development
  • concrete repairing substitute according to DIN 1504-3 (V2/50 new, V2/160 new)
  • certificate of conformity VeBMR
  • 9 months storage stability
V2 quick-setting grout series

V2 quick-setting grout new

type V2/20 NEW V2/50 NEW V2/160 NEW
grain size mm 0-2 0-5 0-16
grouting height mm 6-50 (80)* 20-125 (200)* 80-400 (640)*
compressive strength class C60/75 C70/85 C70/85
early strength class A A A
shrinkage class SKVM 0 SKVB 0 SKVB 0
compressive strength in MPa
after 2h ≥ 15 ≥ 15 ≥ 15
after 4h ≥ 25 ≥ 25 ≥ 25
after 6h ≥ 35 ≥ 35 ≥ 35
after 12h ≥ 40 ≥ 40 ≥ 40
after 1d ≥ 45 ≥ 45 ≥ 45
after 7d ≥ 70 ≥ 70 ≥ 70
after 28d ≥ 80 ≥ 90 ≥ 90
*According to the DAfStb-Rili VeBMR, the max. grouting height is limited to 25 times the maximum grain diameter. Any deviating grouting heights must be approved by the planner.

V2 quick-setting grout old

type V2/10 V2/40 V2/80 V2/160
grain size mm 0-1 0-4 0-8 0-16
grouting height mm 5-30 20-100 50-200 100-400
compressive strength class C55/67 C55/67 C60/75 C60/75
early strength class B B B A
shrinkage class SKVM II SKVM II SKVB 0 SKVB 0
compressive strength in MPa
after 2h ≥ 5 ≥ 5 ≥ 5 ≥ 5
after 4h ≥ 10 ≥ 10 ≥ 10 ≥ 10
after 6h ≥ 12 ≥ 12 ≥ 12 ≥ 12
after 12h ≥ 18 ≥ 18 ≥ 18 ≥ 18
after 1d ≥ 25 ≥ 25 ≥ 30 ≥ 40
after 7d ≥ 60 ≥ 60 ≥ 60 ≥ 60
after 28d ≥ 70 ≥ 70 ≥ 70 ≥ 70

Improved properties of the new VB serie

PAGEL® VB flash grout

  • extended application range through three products
  • higher early strength (1 h ≥ 10 MPa)
  • grouting heights up to 640 mm
  • higher compressive strength
  • improved flowability
  • significantly lower shrinkage behaviour
  • lower heat development
  • 9 months storage stability
  • manhole mortar DIN EN 19573 (VB20)
VB flash grout series

VB flash grout new

type VB20 NEW VB50 NEW VB160 NEW
grain size mm 0-2 0-5 0-16
grouting height mm 6-80 20-200 80-640
compressive strength in MPa
after 0,5h ≥ 5 ≥ 5 ≥ 5
after 1h ≥ 10 ≥ 10 ≥ 10
after 2h ≥ 20 ≥ 20 ≥ 20
after 1d ≥ 40 ≥ 40 ≥ 40
after 7d ≥ 60 ≥ 60 ≥ 60
after 28d ≥ 70 ≥ 70 ≥ 70

VB flash grout old

type VB10 VB40
grain size mm 0-1 0-4
grouting height mm 10-50 30-60
compressive strength in MPa
after 0,5h ≥ 5 ≥ 5
after 1h ≥ 8 ≥ 8
after 2h ≥ 10 ≥ 10
after 1d ≥ 35 ≥ 35
after 7d ≥ 50 ≥ 50
after 28d ≥ 60 ≥ 60

Improved properties of the new VB-P10 flash mortar

PAGEL® VB-P10 flash mortar

  • higher early strength
  • improved stability (1 h ≥ 8 MPa)
  • significantly lower shrinkage behaviour
  • higher compressive strength after 28d
  • 9 months storage stability
  • manhole mortar, repair mortar DIN EN 19573
VB-P10 flash mortar

VB-P10 flash mortar new

type VB-P10 NEW
grain size mm 0-1
layer thickness mm 5-50
compressive strength in MPa
after 0,5h ≥ 5
after 1h ≥ 8
after 2h ≥ 10
after 1d ≥ 20
after 7d ≥ 35
after 28d ≥ 65

VB-P10 flash mortar old

type VB-P10
grain size mm 0-1
layer thickness mm 10-50
compressive strength in MPa
after 0,5h ≥ 5
after 1h ≥ 8
after 2h ≥ 10
after 1d ≥ 35
after 7d ≥ 40
after 28d ≥ 55

Improved features of the new R20 series

PAGEL® R20 quick-setting mortar

  • only three products left for larger application range
  • higher early strength after 2 hours
  • improved stability
  • significantly lower shrinkage behaviour
  • 9 months storage stability
  • repair mortar DIN EN 19573
  • factory production control according to EN 1504-3
R20 quick-setting mortar series

R20 quick-setting mortar new

type R20/02 NEW R20/10 NEW R20/50 NEW
grain size mm 0-0,2 0-1 0-5
layer thickness mm 0-10 3-40 20-200
compressive strength in MPa
after 2h ≥ 5 ≥ 7 ≥ 10
after 4h ≥ 8 ≥ 10 ≥ 15
after 8h ≥ 10 ≥ 15 ≥ 20
after 1d ≥ 15 ≥ 20 ≥ 25
after 7d ≥ 30 ≥ 35 ≥ 35
after 28d ≥ 55 ≥ 65 ≥ 65

R20 quick-setting mortar old

type R20/02 R20/05 R20/10 R20/20 R20/40 R20/80
grain size mm 0-0,2 0-0,5 0-1 0-2 0-4 0-8
layer thickness mm 0,5-5 2-6 3-20 5-40 20-50 30-100
compressive strength in MPa
after 2h ≥ 5 ≥ 5 ≥ 5 ≥ 5 ≥ 5 ≥ 5
after 4h ≥ 6 ≥ 10 ≥ 10 ≥ 10 ≥ 10 ≥ 10
after 8h ≥ 10 ≥ 13 ≥ 15 ≥ 15 ≥ 15 ≥ 15
after 1d ≥ 15 ≥ 20 ≥ 20 ≥ 25 ≥ 25 ≥ 25
after 7d ≥ 30 ≥ 40 ≥ 40 ≥ 40 ≥ 45 ≥ 40
after 28d ≥ 50 ≥ 50 ≥ 55 ≥ 55 ≥ 55 ≥ 55

PAGEL (C) 2023