IB20 industrial floor

ready-to-use, low-shrinkage, abrasion-resistant industrial floor in accordance with DIN EN 13813 for stress groups II and III

  • hardens quickly, can bear loads very early
  • impermeable to water and to great extent mineral oil and fuel resistant
  • RM02: corrosion protection
  • IH10: bonding bridge for industrial floors
  • residual moisture after 24 hours < 4,0 % (calcium carbide method)
  • granularity: 0-2 mm
  • layer thickness: 10-100 mm
  • consumption: 2,00 kg/(m²⋅mm)
  • processing time at 20°C (68 °F): about 30 min
  • pressure resistance after 28 d: ≥ 60 N/mm²

Request test certificates

If you need further test certificates, please do not hesitate to contact us.
Tel. +49 201 685040
Email: pruefzeugnisse@pagel.de

Please enter your name.
Please enter a subject.
Please enter a valid phone number.
Please enter a message.

I have read the data protection declaration and I consent to the data I have provided being electronically collected and stored. My data is used only strictly for the processing and answering of my request.

You must accept the Terms and Conditions.


  • ready-to-use mortar for industrial floors, just mix with water
  • easy to apply
  • quick hardening, rapidly capable of bearing weight
  • low shrinkage
  • abrasion resistant
  • impermeable to water and to great extent mineral oil and fuel resistant
  • stress group II and III (DIN 18560-7)
  • residual moisture after 24 hours < 4 % (calcium carbide method)
  • satisfies the requirements of the type A1 construction materials (non-flammable) according to the ruling 2000/605/EG of the European Commission, September 26th 2000 (published in official journal, L258)

fields of application

  • industrial floor subject to high loads
  • hangars
  • parking buildings
  • repairshops and garages
  • exhibition halls
  • market halls