VT10 turbo grout

highly flowable swelling grouting mortar with high initial firmness

  • already capable of bearing weight after 30 minutes
  • highly flowable and easy to handle
  • high profitability through very quick form-working
  • easy processing between +1 °C and +30 °C (33,8 °F and 86 °F)
  • high resistance to frost and de-icing salt (CDF proof)
  • cement-bound
  • granularity: 0-1 mm
  • grouting height: 10-50 mm
  • consumption: 1.900 kg/m³
  • processing time at 20°C (68 °F): about 1-3 min
  • expansion after 24 h: ≥ 0,1 %
  • compressive strength after 30 min: ≥ 5 N/mm²
  • compressive strength after 28 d: ≥ 70 N/mm²
CE marking

Request test certificates

If you need further test certificates, please do not hesitate to contact us.
Tel. +49 201 685040
Email: pruefzeugnisse@pagel.de

Please enter your name.
Please enter a subject.
Please enter a valid phone number.
Please enter a message.

I have read the data protection declaration and I consent to the data I have provided being electronically collected and stored. My data is used only strictly for the processing and answering of my request.

You must accept the Terms and Conditions.


  • high profitability through rapid work process
  • capable of bearing weight after only 30 minutes
  • easy processing
  • high fluidity
  • no shrinkage
  • impermeable to water
  • frost resistant after only 2 hours
  • easy processing between +1 °C and +30 °C (33,8 °F and 86 °F)
  • construction material type A1, according to the ruling 2000/605/EG of the European Commission, September 26th 2000 (published in official journal, L258)

fields of application

  • shaft adjustment
  • grouting of inspection openings, gate and butterfly valves, signalling devices (road construction)
  • grouting of pipe lead-throughs in gas and water installations