VS-P jointing mortar

swelling jointing mortar of gel-like consistence in accordance to the DAfStb VeBMR directive

  • jointing mortar approved by DIBt
  • sprayable
  • very easy to mold, for mechanical jointing of prefabricated parts
  • cement-bound
  • granularity: 0-2 mm
  • base plate grouting height: 10-40 mm
  • consumption: 2.000 kg/m³
  • processing time at 20°C (68 °F): about 60 min
  • swelling after 24 h: ≥0,3 %
  • pressure resistance after 28 d: ≥ 80 N/mm²
QDB certificate of conformity DAfStb/VeBMR


  • swelling mortar with thixotropic consistence, easy to mold and form for mechanical filling of joints between prefabricated parts
  • easy to mix with double-shaft mixer, hand mixer, forced action mixer and suitable continous flow mixer for modern mixing procedures
  • pumpable with customary spiral pumps with feed volume adjusted to joint width
  • develops high initial und final strength
  • best bond in joints subject to shear stress due to controlled swelling
  • impermeable to water
  • satisfies the requirements of the type A1 construction materials (non-flammable) according to the ruling 2000/605/EG of the European Commission, September 26th 2000 (published in official journal, L258)

classification according to VeBMR

  • shrinkage type: SKVM II
  • initial strength type: A
  • compression strength type: C55/67

fields of application

  • jointing mortar, approved by the competent authority for the PFEIFER–VS®-ISI/BZ Systems 3D
  • filling of vertical and horizontal joints of prefabricated reinforced concrete structures
  • filling of constructional joints, slots and cavities