E1SF anchoring mortar

soft plastic swelling mortar with high initial and final firmness

  • controlled swelling for adherent bonding between concrete and supporting construction
  • develops high bond strength
  • cement-bound
  • plastic consistence
  • granularity: 0-0,5 mm
  • processing time at 20°C (68 °F): about 45 min
  • consumption: 1.800 kg/m³
  • Quellmaß nach 24 h: ≥ 0,1 %
  • pressure resistance after 28 d: ≥ 50 N/mm²

Request test certificates

If you need further test certificates, please do not hesitate to contact us.
Tel. +49 201 685040
Email: pruefzeugnisse@pagel.de

Please enter your name.
Please enter a subject.
Please enter a valid phone number.
Please enter a message.

I have read the data protection declaration and I consent to the data I have provided being electronically collected and stored. My data is used only strictly for the processing and answering of my request.

You must accept the Terms and Conditions.


  • soft, plastic consistence
  • controlled swelling with strong adherent bonding
  • high initial and final strength and high bond strength
  • low water/cement ratio
  • to great extent resistant to mineral oils and fuel
  • satisfies the requirements of the type A1 construction materials (non-flammable) according to the ruling 2000/605/EG of the European Commission, September 26th 2000 (published in official journal, L258)

fields of application

  • water treatment plants
  • for overhead works and filling of joints, cavities and rock bolts
  • on vertical surfaces as well as for centrifugation in pipes and shafts