E1F Anchoring and injection glue

highly flowable swelling injection glue with high initial and final firmness

  • concrete restoration in accordance with DIN EN 1504-6
  • high frost and de-icing salt resistance
  • controlled swelling
  • no aggregates
  • develops high bond strength
  • cement-bound
  • granularity: 0-0,125 mm
  • Quellmaß nach 24 h: ≥ 0,1 %
  • consumption: 1.500 kg/m³
  • pressure resistance after 28 d: ≥ 60 N/mm²
CE marking
E1F

Request test certificates

If you need further test certificates, please do not hesitate to contact us.
Tel. +49 201 685040
Email: pruefzeugnisse@pagel.de

Please enter your name.
Please enter a subject.
Please enter a valid phone number.
Please enter a message.

I have read the data protection declaration and I consent to the data I have provided being electronically collected and stored. My data is used only strictly for the processing and answering of my request.

You must accept the Terms and Conditions.

properties

  • high fluidity
  • low water/cement ratio
  • controlled swelling
  • no aggregates
  • develops high initial and final strenghts and high bond strength
  • impermeable to water and to great extent impermeable to oil, at the same time anticorrosive
  • satisfies the requirements of the type A1 construction materials (non-flammable) according to the ruling 2000/605/EG of the European Commission, September 26th 2000 (published in official journal, L258)

fields of application

  • grouting and casting of anchorings in rock, soil, concrete and brickwork
  • filling of cracks, joints, gravel pockets and cavities in vertical and horizontal spots
  • grouting of orifices of reinforcement in pre-stressed concrete
  • back-filling of acid protection plates in repair works in wastewater processing plants and sewers