SP45 SPCC sprayable mortar (SA-2 SA-3)

cement-bound, hydraulic-setting SPCC wet-sprayable mortar for the dense-flow wet-spraying method on concrete bases SA-2 and SA-3

  • concrete restoration in accordance to DIN EN 1504-3
  • approved in accordance to the BAW leaflet ZTV-W LB 219, 5.4 for aged concrete basis with low bearing capacity
  • high frost and de-icing salt resistance
  • granularity: 0-4 mm
  • layer thickness: 20-60 mm
  • consumption: 2,00 kg/(m²⋅mm)
  • processing time at 20°C (68 °F): about 45 min
  • compressive strength after 28 d: ≥ 30 N/mm²
CE marking

Request test certificates

If you need further test certificates, please do not hesitate to contact us.
Tel. +49 201 685040
Email: pruefzeugnisse@pagel.de

Please enter your name.
Please enter a subject.
Please enter a valid phone number.
Please enter a message.

I have read the data protection declaration and I consent to the data I have provided being electronically collected and stored. My data is used only strictly for the processing and answering of my request.

You must accept the Terms and Conditions.


  • cement-bound, hydraulically setting SPCC sprayable mortar for dense-flow wet-spraying process
  • ready-to-use, just mix with water
  • microsilica additives
  • also appropriate for back-injection of reinforcing steel
  • high firmness on vertical and overhead surfaces
  • low Young's modulus and low shrinkage
  • high resistance to frost and de-icing salt (CDF proof)
  • impermeable to water and to great extent resistant against mineral oils and fuel
  • pumpable and easy to apply with mono-feed-pumps with regulation device

fields of application

  • Restorations in hydraulic constructions under the competence of the Federal Bureau of Hydraulic Constructions (BAW)
  • ZTV-W LB 219, A2 A3
  • concrete repair and reinforced concrete structures with low compressive strength
  • reservoirs, weir systems, ship-elevarors, quay walls