R20/05 quick-setting putty

cement-based, ready-to-use, quick-setting repairing putty, excellent for works on wall surfaces

  • concrete restoration in accordance to DIN EN 1504-3
  • usable at temperatures of 1 °C (33.8 °F) or higher, from 5 °C (41 °F) capable of bearing loads after 2 hours
  • ready to use and easy to process
  • high frost and de-icing salt resistance
  • residual moisture after 1 day 4 % and after 3 days 3 %
  • granularity: 0-0,5 mm
  • layer thickness: 2,0-6,0 mm
  • consumption: 1,80 kg/(m²⋅mm)
  • processing time at 20°C (68 °F): about 15 min
  • pressure resistance after 28 d: ≥ 50 N/mm²
CE marking
R20/05

Request test certificates

If you need further test certificates, please do not hesitate to contact us.
Tel. +49 201 685040
Email: pruefzeugnisse@pagel.de

Please enter your name.
Please enter a subject.
Please enter a valid phone number.
Please enter a message.

I have read the data protection declaration and I consent to the data I have provided being electronically collected and stored. My data is used only strictly for the processing and answering of my request.

You must accept the Terms and Conditions.

properties

  • permanent solution for urgent repairs
  • workable from 1 °C (33.8 °F) on
  • at 5 °C (41 °F) or higher, can bear weight after only 2 hours
  • ready to use and easy to process
  • plastic additives, anti-corrosion
  • residual moisture 4% after 1 day, 3% after 3 days (calcium carbide method)
  • satisfies the requirements of the type A1 construction materials (non-flammable) according to the ruling 2000/605/EG of the European Commission, September 26th 2000 (published in official journal, L258)

fields of application

  • quick repairs
  • concrete and mortar surfaces
  • screeds, stairs
  • floor and wall surfaces
  • fractures, holes, edges
  • canalisation
  • repair of inner beds in pipes
  • laying of stoneware tiles