KA-S filling mortar

extremely quick-bonding filling mortar for all kinds of filling sealing works

  • particularly easy to handle
  • processing time 30 to 60 seconds
  • soft plastic mortar consistence
  • cement-bound mix without additives or catalysts that could facilitate corrosion
  • allows vapour diffusion, rustproof
  • granularity: 0-0,5 mm
  • layer thickness: 0,5-30 mm
  • consumption: 1,75 kg/(m²⋅mm)
  • processing time at 20°C (68 °F): about 0,5 min
  • pressure resistance after 1h: ≥ 4 N/mm²
  • pressure resistance after 28 d: ≥ 60 N/mm²

properties

  • immediately bonding plugging mortar for all kinds of plugging, filling and sealing works
  • particularly easy to apply, just needs to be mixed with water
  • soft plastic consistence. Depending on the temperature, can quickly bear weight
  • cement-bound mix without additives or catalysts that could facilitate corrosion
  • allows vapour diffusion and presents high frost and de-icing salt resistance
  • impermeable to water and to great extent oil and fuel resistant
  • satisfies the requirements of the type A1 construction materials (non-flammable) according to the ruling 2000/605/EG of the European Commission, September 26th 2000 (published in official journal, L258)

fields of application

  • Sealing of stationary cracks in concrete and masonry walls, canalisation shafts and other shafts
  • temporary sealing of cracks leaking water in order to facilitate further filling of the cracks
  • sealing of diaphragm walls in building construction and civil engineering facilities
  • embedding and sealing of pipe lead-throughs
  • mortar for installation and fitting of electric, heating and other ducts
  • temporary extensive sealings