- strong adherence on load-bearing concrete or clinker brick floors
- suitable for mechanical application and application by hand
KA canalisation slurries
cement-based waterproofing rigid slurries with plastic additives for compound coatings with very high resistance against sulphates
- granularity: 0-0,5 mm
- layer thickness: 2,0-6,0 mm
- consumption: 1,80 kg/(m²⋅mm)
- processing time at 20°C (68 °F): about 20 min
- compressive strength after 2h: ≥ 5 N/mm²
- compressive strength after 28 d: ≥ 50 N/mm²
properties
- sulphate resistant, ready-to-use, plastic- modified, cement-bound, water-proofing slurries for composite-coatings
- ready-to-use, just mix with water
- easy to apply
- sprayable
- impermeable to water and to great extent mineral oil and fuel resistant
- suitable for mechanical application and application by hand
- application by hand on vertical and overhead surfaces, as well as on horizontal concrete surfaces in painting and coating works
- sprayable on vertical and overhead surfaces, dense structure texture
- strong adherence on load-bearing concrete or clinker brick floors
- satisfies the requirements of the type A1 construction materials (non-flammable) according to the ruling 2000/605/EG of the European Commission, September 26th 2000 (published in official journal, L258)
fields of application
- sewage collectors
- sewage shafts
- canalisations and waste water pipes
- service water containers
- rainwater retention basins
- sealing against non-pressing water (indoors and outdoors)
- sealing against ground moisture