- CE-marking in accordance with EN 1504-2
- up to a maximum crack width alteration of 0.2 mm
- allows water vapour diffusion
- hinders the penetration of CO2
D1 PAGELASTIC
2-component, highly elastic, cement-based slurries with plastic additives
- mix: dry (dry mortar) and fluid component (mixing liquid)
- Colour tone: grey (ca. RAL 7032)
- consumption (2 layers): about 2,5-2,7 kg/m²
- minimum layer thickness (2 layers): 2 mm
- processing time at 20°C (68 °F): about 120 min
properties
- crack bridging surface protection coating for masonry, mortar and concrete surfaces in non-traffic areas
- protects against de-icing salts in spray or splash areas
- bridge supports and curbs
- balconies, terraces, under-tile sealing
fields of application
- crack bridging surface protection coating for masonry, mortar and concrete surfaces in non-traffic areas
- protects against de-icing salts in spray or splash areas
- bridge supports and curbs
- balconies, terraces, under-tile sealing
- satisfies the requirements of surface protection systems OS-D I according to ZTV-ING part 3 and OS-5b according to DAfStb directive
- bridges surface alligator-cracks and separating crack > 0.2mm, even at -20 °C (-4 °F) temperatures
- for waterproofing of buildings, firm, adherent, resistant to ageing, impermeable to water and bridging cracks up to an alteration of the crack width of 0.2 mm
- allows water vapour diffusion
- hinders the penetration of CO2 (carbonation)
- due to its texture, it can be spread with brush or trowel or in the wet-spraying method with radial air-stream nozzles
- for colour design can be painted over with a crack-bridging surface protection system, e.g. O2DE