Our materials laboratory
Product Development and Research
Our materials laboratory in detail
In PAGEL we have at our disposal a well appointed and up-to-date materials laboratory. In addition to mechanical test processes, we can also measure the swelling and contracting deformation among other characteristics of the materials, in order to develop new products. The workability and the adequacy of our products are tested in climatic chambers at temperatures between -20°C and +60°C (-4°F and 140°F respectively).

- Compression load: 5.000 kN
- Compressive strength on prism, cube and cylinder
- Flexural strength on prism and bar
- Tensile strength on cylinder
- Static Young's modulus

Temperature tests
- Climatic chamber for preparation of samples and for testing newly poured concrete between -10°C and +50°C (14°F and 122°F)
- Climatic cabinets for sample storage at temperatures between -20°C and +60°C (-4°F and 140°F) and air humidity between 0% and 100%
- Storage of samples in water between 5°C and 35°C (41°F and 95°F)

Measurement of deformations
Schleibinger shrinkage-cone at temperatures between +5°C and +35°C (41°F and 95°F) for testing the contraction and expansion behaviours
Complementary tests
- Automatic Blaine-value calculation
- Sieving analysis
- Vicat hardness test
- Tear strength and adhesive pull strength
- Böhme's grinding resistance test
- Acoustic analysis of the resonance frequency for non-aggressive testing of the dynamic and static Young's modulus
- Characteristics of newly poured mortar in accordance to DIN EN 12350, directive VeBMR and ASTM

External monitoring
External monitoring of the product quality carried out by independent, certificated and accredited testing institutes and laboratories
